How to create a bootable pen drive #Manual Method

 Hi Guys,
This is our First post.Our Main moto is Simplifying The Latest technology to reach up-to common man. So We Start from Laptop.

In this days Laptop|Personal Computer is common for every E-Soft Work.

Every P.C|Laptop needs to have some operating System. 

Most of Our Systems containing Windows as Operating System Which is created By the great "Bill gates"

So We are Going to help How to install Windows Operating system in your Laptop|personal computer Using a U.S.B mass Storage By manual Method.

Before getting into installation process we need to know how to create a boot-able pen drive for windows.

So this post helps you get rid out of this.

So please follow this steps

Now a days So many solutions are there for creating a boot-able pen drive for windows 7.But why we are choose manual method It is discussed in later.


So we are going to give you a precised and best way for booting Windows manually (By using mass storage's like pen-drive,Memory Cards etc.).


Just 3 Simple Steps : You have to follow it carefully.

There are Three Simple Steps to install Genuine Windows(any version)  manual Booting

Requirements:
1.A running PC with windows OS
2.A pen drive more than 4 g.b
3.Windows OS files
4.Some Patience :)

Boot-able Pen drive creating Process commands:

1.Take a pen drive(more than 4g.b.| "8.gb is sufficient")
2.plug it into p.c
3.Follow this steps
-------


----> Press windows key and type "CMD" and press Enter or "simply Open cmd"

----> type "diskpart" | A prompt will be open then click on "yes" to continue

----> type "list disk" | Then you will get list of disks active in your pc

----> type "select disk 1" | Your Selecting now disk 1 i.e your pendrive

----> type "clean" | Make sure no content will be there in your pendrive otherwise you will lose it.

----> type "create partition primary" | It will creates a primary partition in your pen-drive

----> type "select partition 1"

----> type "active"

----> type "format fs=ntfs quick" | wait for some time to complete 100%

----> type "assign"

post shrunken link :
----> Now Select all windows Os files using ctrl+A  and copy them using ctrl+C
and paste them in your usb|pen drive using ctrl+V
----> Now type "exit" in cmd. Thats it, you are all done.

Benefits::
   
    1)Manual method is safest method
    2)when you don't have any booting software this will work 100% sure
    3)You gain definitely some knowledge

Still you got problems then Download Our PDF Here...Click

If You Still Can't Understand Then watch Our Video Here Click

  

                                                            Thank you

#Team CircuitReady.com