What is a Resistor (R)...?

Resistor is an electrical component that reduces the electric current.
The resistor's ability to reduce the current is called resistance and    is measured in units of ohms (symbol: Ω).
If we make an analogy to water flow through pipes, the resistor is
a thin pipe that reduces the water flow.

Ohm's law

The resistor's current I in amps (A) is equal to the resistor's voltage V in volts (V)
divided by the resistance R in ohms (Ω):


The resistor's power consumption P in watts (W) is equal to the resistor's current I in amps (A)
times the resistor's voltage V in volts (V):

P = I × V

The resistor's power consumption P in watts (W) is equal to the square value of the resistor's current I in amps (A)
times the resistor's resistance R in ohms (Ω):

P = I ² × R

The resistor's power consumption P in watts (W) is equal to the square value of the resistor's voltage V in volts (V)
divided by the resistor's resistance R in ohms (Ω):

P = V ² / R

Resistors in parallel

The total equivalent resistance of resistors in parallel R_Total is given by:

So when you add resistors in parallel, the total resistance is decreased.

Resistors in series

The total equivalent resistance of resistors in series R_total is the sum of the resistance values:

R_total = R₁+ R₂+ R₃+...

So when you add resistors in series, the total resistance is increased.

Dimensions and material affects

The resistance R in ohms (Ω) of a resistor is equal to the resistivity ρ in ohm-meters (Ω∙m) times the resistor's length l in meters (m) divided by the resistor's cross sectional area A in square meters (m²):

Resistor symbols

	Resistor (IEEE)	Resistor reduces the current flow.
	Resistor (IEC)
	Potentiometer (IEEE)	Adjustable resistor - has 3 terminals.
	Potentiometer (IEC)
	Variable Resistor / Rheostat (IEEE)	Adjustable resistor - has 2 terminals.
	Variable Resistor / Rheostat (IEC)
	Trimmer Resistor	Presest resistor
	Thermistor	Thermal resistor - change resistance when temperature changes
	Photoresistor / Light dependent resistor (LDR)	Changes resistance according to light

Resistor color code

The resistance of the resistor and its tolerance are marked on the resistor with color code bands that denotes the resistance value.
There are 3 types of color codes:

• 4 bands: digit, digit , multiplier, tolerance.
• 5 bands: digit, digit, digit , multiplier, tolerance.
• 6 bands: digit, digit, digit , multiplier, tolerance, temperature coefficient.

Resistance calculation of 4 bands resistor

R = (10×digit₁ + digit₂) × multiplier

Resistance calculation of 5 or 6 bands resistor

R = (100×digit₁ + 10×digit₂+digit₃) × multiplier

Resistor types

Variable resistor	Variable resistor has an adjustable resistance (2 terminals)
Potentiometer	Potentiometer has an adjustable resistance (3 terminals)
Photo-resistor	Reduces resistance when exposed to light
Power resistor	Power resistor is used for high power circuits and has large dimensions.
Surface mount (SMT/SMD) resistor	SMT/SMD resistors have small dimensions. The resistors are surface mounted on the printed circuit board (PCB), this method is fast and requires small board area.
Resistor network	Resistor network is a chip that contains several resistors with similar or different values.
Carbon resistor
Chip resistor
Metal-oxide resistor
Ceramic resistor	#Team Circuitready